How to add a logo or watermark to an image

By the Filific team · Updated

To put your logo on a picture, open the picture in the Filific image editor, go to the Overlay tab and click Add an image on top. Choose your logo file, drag it to a corner, set its Size and Opacity with the two sliders, then download or share the result. For a text watermark, use the Text tab instead.

What is a watermark, and when is it worth adding?

A watermark is a small mark placed on top of a picture to show who made it or where it came from. It is usually a logo, a name, a web address or a social media handle, set in a corner or across the middle. People add one for a few different reasons:

Be realistic about what a watermark does. It makes copying less tempting and keeps your name attached, but it does not make a picture impossible to copy. A small mark in a corner can be cropped off in seconds. A large, faint mark across the middle is harder to remove but also gets in the way of the picture. Choose the balance that fits the reason you are adding it.

What makes a good logo file for a watermark?

The editor accepts a PNG, JPEG, WebP or GIF as the picture on top. Which one you use makes a big difference to how the result looks:

Have two versions of your logo ready: a light one (white or pale) for dark photos and a dark one for light photos. A single colour that works on every picture is rare, and switching files is quicker than fighting with opacity.

How do I add a logo with Filific?

  1. Open the picture. Go to the image editor. Drop the picture on it, choose it from your device, paste a copied image with Ctrl+V, or paste a link to an image in the box under the editor.
  2. Open the Overlay tab. At the top of the tab is a button called Add an image on top. The hint under it reads: a logo, a sticker or a second picture.
  3. Choose your logo file. It is placed in the middle of the picture, at the size the Size slider shows (30 by default), and it is selected so you can work on it straight away.
  4. Move it. Drag the logo on the picture to where you want it. For small, careful steps, use the arrow keys on your keyboard: each press moves it one pixel, and with Shift held down, ten pixels.
  5. Set the size. Move the Size slider. The logo grows or shrinks around its own centre, so it stays roughly where you put it.
  6. Set the opacity. Move the Opacity slider to make the logo see-through. It goes from 100 (solid) down to 10 (very faint).
  7. Save the result. Choose PNG or JPG next to the Download button, pick a width if you want a smaller file, and click Download. Or click Share to upload the finished picture and get a link and a QR code.

To change the logo later, click it on the picture to select it again. The Overlay tab opens with its size and opacity on the sliders. To take it off, select it and click Remove the selected part, or press Delete. Undo and Redo (Ctrl+Z and Ctrl+Y) work as usual.

How big should the logo be, and where should it go?

The Size slider is a share of the picture's width: at 30, the logo is about 30 percent as wide as the picture, whatever the picture's pixel size. That makes it easy to reuse a setting across photos of different sizes. Some starting points:

PurposeWhereSizeOpacity
Quiet credit on a photoBottom right or bottom left corner10 to 1560 to 80
Brand mark on a product photoA corner with plain background12 to 2090 to 100
Proof or preview that should not be reusedAcross the middle50 to 8020 to 35
Screenshot or chart sourceBottom edge, away from the data10 to 1570 to 100

Leave a small margin between the logo and the edge of the picture. A logo pressed right into the corner looks cramped, and some platforms round the corners of pictures or crop the edges in previews, which can cut it off. A gap of two or three percent of the width is usually enough.

Place the logo over a calm part of the picture: sky, a wall, a table, a plain background. Over a face, text or a busy pattern it is hard to read and distracts from the subject.

If you want the logo exactly in the middle, select it and click Center. This button appears in the Overlay tab whenever a picture on top is selected. A centred logo stays in the middle even if you crop the picture afterwards, until you drag it somewhere else.

How do I add a text watermark instead of a logo?

If you do not have a logo file, or you want your name, a web address or a handle, the Text tab does the job:

  1. Open the Text tab and type the words in the box, for example your site's name or Photo: Your Name.
  2. Click Add text. The text is placed on the picture and selected.
  3. Drag it to where you want it, and set its Size with the slider.
  4. Choose a Font (Sans, Serif, Mono or Handwriting) and a Colour.
  5. Use the checkboxes to make it readable on any background: Bold, Shadow, Outline, or Background box with a colour of its own.

White text with Shadow switched on reads well on most photos. On a very bright or very busy photo, add Outline, or a dark Background box behind the words.

There is one difference to know about: text has no opacity slider. Text is drawn solid. If you want a faint, see-through text mark across the middle of a picture, make the words into a PNG image first (for example in a design app, with a transparent background) and add it with Add an image on top, where the Opacity slider works.

You can use both together: a logo in one corner and a short web address in text under it. Each part is selected and moved on its own.

How do I watermark many pictures at once?

You can open many images in the editor at the same time and give them all the same logo:

  1. Open all the pictures together: choose or drop several files, or add more with the Add tile in the strip of thumbnails above the editor.
  2. Add the logo (and any text) to one of them and get its place, size and opacity right.
  3. Click Apply to all. Confirm the message. Every other image gets the same logo and text, placed and sized in proportion to its own width and height.
  4. Click through the thumbnails and check each one. On a picture where the logo lands on something important, select it and move it. Each image keeps its own undo.
  5. Make sure the menu next to the format says All images (for example All 12 images), not This image, then click Download. Several images come down in one ZIP file.

Apply to all also copies the filter, colours and frame of the image you are on, and it replaces any text, drawings and pictures on top that the other images already had. Blurred parts and each image's crop stay as they were. The guide to editing many images at once explains what is copied and what is not in more detail.

Because the logo's position is copied as a share of the width and height, a logo in the bottom right corner of a landscape photo also lands in the bottom right corner of a portrait photo. Its size follows each picture's width, so on a tall portrait it can look smaller. Check the portraits after Apply to all.

Should I save a watermarked picture as PNG or JPG?

For photos, choose JPG. The file is much smaller and the logo looks the same. For screenshots, charts and graphics with flat colours and sharp text, choose PNG, which keeps edges crisp. If the original picture had a transparent background and you want to keep it, choose PNG: JPG has no transparency, so the editor fills see-through areas with white. The guide to PNG, JPEG and WebP covers the difference in more depth.

The width menu next to Download lets you save a smaller copy: Full size, or 1920, 1280, 1080 or 800 pixels wide. The logo is scaled with the picture, so it keeps the same share of the width.

Common problems and how to fix them

The logo has a white box around it

The logo file has a solid background, usually because it is a JPEG or a PNG saved without transparency. Get a transparent PNG of the logo. Lowering the opacity does not help: the box fades along with the logo.

The logo looks blurry

The logo file is smaller than the size you have chosen on the picture, so it is being stretched. Use a larger logo file, or lower the Size slider.

The logo disappears on some photos

Its colour is too close to the background there. Move it to a darker or lighter area, or keep a light and a dark version of the logo and use whichever fits.

I cannot select the logo

Click directly on it with the Overlay tab, or any tab other than Blur and Draw, open. In Blur and Draw, dragging on the picture makes a new blurred area or drawing instead.

The logo moved after I rotated the picture

Rotating and flipping turn the picture with everything on it, so a logo in the bottom right corner can end up in another corner. Rotate first, then add the logo. See how to rotate and flip an image.

The logo is gone when I open a new picture

Pictures on top belong to one editing session. My presets in the Presets tab saves a filter, colours and frame, but not a logo or text, so add the logo again next time, or open all the pictures together and use Apply to all.

Is my logo or photo uploaded while I work?

No. The editor runs in your browser, on your device. Your photo and your logo stay on your computer or phone while you edit. Nothing is uploaded unless you click Share or save to one of your folders. Download saves the finished picture straight to your device.

If you share the result, the link works like any other Filific link: you choose how long it lasts in the menu next to the Share button, and the file is removed when it expires. The original picture on your device is never changed, because an edited image is always saved as a new file.

Quick checklist before you post a watermarked picture

Add your logo